Frame built from MiniTec profile, precise linear rail systems. Massive steel headstocks for supporting bore holes cylinders, shafted cylinders and sleeves. Hawk built with over-simple electronics and pneumatic-free. Large and comfortable working area for the operator between the optical system and the plate cylinder. Left headstock is moved by hand on the linear rail. The mounter can accept plate cylinders between 50-220 mm in diameter and 150-700 mm face width.
FLEXOTECH HAWK
Frame built from MiniTec profile, precise linear rail systems. Massive steel headstocks for supporting bore holes cylinders, shafted cylinders and sleeves. Hawk built with over-simple electronics and pneumatic-free. Large and comfortable working area for the operator between the optical system and the plate cylinder. Left headstock is moved by hand on the linear rail. The mounter can accept plate cylinders between 50-220 mm in diameter and 150-700 mm face width.
Headstock/cone type for bore hole cylinder and sleeve
The mounter can accept bore hole plate cylinders. In certain cases shafted cylinder can also be supported in the cone-sleeve system with the help of negative adapters. The cone-sleeve system together with the sleeve pack is also suitable for accepting and mounting sleeves. These sleeve adapters fit on the same place and same way as the cylinder adapters.
The sleeves pulled on the adapters 10 mm wide ramp.
Standard type for traditional shafted plate cylinder
The mounter is primarily for shafted cylinder. The headstock system contains a pair of shaft adapters.
